Malaysia Plastic Welding Tools | Plastic Pipe Welding Machine | Hot Air Tools | Hot Air Blower | Test & Measuring Instruments | Industrial Heater | Temperature Sensor | Temperature Controller | Malaysia Leister Plastic Welding Tools | Leister Hand Extruder Welding | Leister Repair and Service Center | Plastic Pipe Welding Machine/Leister Hot Air Tools | Leister Hot Air Blower |




Only available for walk-in customer.


SIL Technology Sdn Bhd
No. 37, Jalan Industri
USJ 1/13,
Taman Perindustrian USJ 1,
47600 Subang Jaya,
Selangor, Malaysia.
+603-8023 7837
+603-8023 6837
+60123902388

Penang Branch

No. 11A, 1st Floor,
Jalan Helang,
Sungai Dua, 11700 Gelugor,
Penang, Malaysia.
+6012-470 8313
+604-655 2213
salespg@siliconinst.com

Johor Branch
80, Jalan Ros Merah 2/17,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+6019-668 9796
+607-288 1696
salesjb@siliconinst.com


Leister Weldplas 605

Previous 12 / 15 Next

Leister Weldplas 605 Plastic Frabrication Leister Plastic Welding  Leister Leister Weldplas 605 Plastic Frabrication Leister Plastic Welding  Leister Leister Weldplas 605 Plastic Frabrication Leister Plastic Welding  Leister Leister Weldplas 605 Plastic Frabrication Leister Plastic Welding  Leister Leister Weldplas 605 Plastic Frabrication Leister Plastic Welding  Leister Leister Weldplas 605 Plastic Frabrication Leister Plastic Welding  Leister
Quantity
Add Quotation


The WELDPLAST 605 is the largest extruder from Leister. Due to its high output of 6 kg/h (13.2 lbs/hr) and its long, slim design, it meets the needs of civil engineering contractors who also want to efficiently implement large-scale projects with ease. The powerful WELDPLAST 605 hand extruder is perfectly designed for the materials and the various applications in civil engineering.
Perfectly suited to weld geomembranes made of PE and PP, which are used worldwide in mines, landfills, fish breeding ponds, water reservoirs and the like. Examples of applications include welding T-joints, connection work, carrying out repairs, etc. The WELDPLAST 605 has numerous positive features that make it a professional hand extruder in civil engineering: For example, its specific screw with two-zone heating is designed for extrusion welding on geomembranes. Various preheating nozzles ensure optimum heating of the welding zone. The well-balanced bow handle allows different grip positions, makes it easy to carry and transport, and enables safe standing. For more flexibility when welding, the WELDPLAST 605 has a welding rod intake on both sides (right and left). In addition, both the drive motor and the blower motor on the WELDPLAST 600 are brushless, making the Leister extruder particularly durable, low-maintenance and long-lasting. The LED light on the WELDPLAST 605 illuminates the welding area, which makes it easy to work in dark or shaded areas. At the same time, the LED light indicates when the extrusion welder has reached its operating temperature. The cable routing of the WELDPLAST 605 is optimized for civil engineering and is therefore located below the extruder. This allows it to be guided forwards when welding and ensures less obstacles. Due to its intelligent power management, undervoltage is compensated up to a certain level. This ensures the same high quality welding. Thanks to ECO mode, users save up to 40% energy during work breaks. The increasing quality requirements in civil engineering were also taken into account when developing the hand extruder. For this reason, the WELDPLAST 605 is equipped with the proven Leister Quality System (LQS), like the new GEOSTAR and TWINNY automatic welders. With the myLeister app, the welding parameters, including GPS coordinates, are also recorded and clearly documented in a log when welding. As mentioned at the beginning, the WELDPLAST 605 is designed for use in civil engineering. In contrast, there’s a specific extrusion welder for tank and container construction: WELDPLAST 600.

TECHNICAL DATA

METRIC
IMPERIAL
VOLTAGE
230 V
FREQUENCY
50/60 Hz
POWER
3680 W
WELDING ADDITIVE
ø 4–5 mm / 0.16–0.2 in
MATERIAL OUTPUT Ø 4 MM
3.9 - 4.8 kg/h
MATERIAL OUTPUT Ø 5 MM
4.9 - 6.0 kg/h
WELDING MATERIALS
HDPE; LDPE; LLDPE
WELDABLE SHEET THICKNESS
20 - 40 mm
AIR GUIDE
External
SCREW HEATING
Coil heater
AIR TEMPERATURE CONTROL
Closed loop
LQS
Yes
DISPLAY
Yes
BRUSHLESS BLOWER MOTOR
Yes
BRUSHLESS DRIVE MOTOR
Yes
LED WORKING LIGHT
Yes
LENGTH
809.0 mm
WIDTH
140.0 mm
HEIGHT
273.0 mm
WEIGHT
12.2 kg
POWER CABLE LENGTH
5.0 m
PLUG
CEE blue, 3 poles, 16A
NOISE EMISSION LEVEL
< 70 dB(A)
CONFORMITY MARK
CE
PROTECTION CLASS
I

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start